ANALYSIS OF INNOVATIVE DEVELOPMENT UZBEKISTAN`S INDUSTRY
##plugins.themes.bootstrap3.article.sidebar##
Published:
Jun 29, 2020
Keywords:
Keywords: innovations, innovative development, innovative marketing, automobile industry, industrial enterprises.
License:
Это произведение доступно по лицензии Creative Commons «Attribution-ShareAlike» («Атрибуция — На тех же условиях») 4.0 Всемирная
Это произведение доступно по лицензии Creative Commons «Attribution-ShareAlike» («Атрибуция — На тех же условиях») 4.0 Всемирная
Section
Статьи
##plugins.themes.bootstrap3.article.main##
Abstract
In the article has been analyzed the innovative development of industry in Uzbekistan, in particular, the
automobile industry of the country was chosen as an object. By empirical research has been done regression
model of technological, marketing and organizational innovations in the industry of the Republic of Uzbekistan.
Also, was investigated correlation between innovative work in the industrial sector of Uzbekistan, costs for
services and innovations. At the end of the paper proposed recommendations for innovative development of
country`s industry
##plugins.themes.bootstrap3.article.details##
How to Cite
Abdukhalilova, L. (2020). ANALYSIS OF INNOVATIVE DEVELOPMENT UZBEKISTAN`S INDUSTRY. Scientific Research Archive, 1(15). Retrieved from https://ejournal.tsue.uz/index.php/archive/article/view/1436
References
1. A. A. Farah, S. A. Saad, A. K. Izian and S. N. Azizi, "Effect of tropical climate to compressive strength of
high performance fiber reinforced concrete," 5th Brunei International Conference on Engineering and
Technology (BICET 2014), Bandar Seri Begawan, 2014, pp. 1-4.
2. A. E. Abalaka and A. D. Babalaga, “Effects of Sodium Chloride Solutions on Compressive Strength
Development of Concrete Containing Rice Husk Ash” ATBU Journal of Environmental Technology, Vol.
4, Issue 1, December 2011, pp. 033-040.
3. A. Ghaffar, A. S. Chavhan and R. S. Tatwawadi, “Steel Fibre Reinforced Concrete” International Journal
of Engineering Trends and Technology (IJETT) Vol. 9, Issue 15, Mar 2014, pp. 791-797.
4. A. H. Hosmani and S. B. Cholekar, “An Experimental Investigation on Concrete Produced by Replaing
Cement with Industrial Red Mud with Addition of Steel Fibers Subjected to Chloride Attack” The IUP
Journal of Structural Engineering, Vol. 9, Issue 3, September 2016, pp. 044-053.
5. A. M. Shende, A. M. Pande and M. G. Pathan, “Experimental Study on Steel Fiber Reinforced Concrete
for M-40 Grade” International Refereed Journal of Engineering and Science (IRJES) Vol. 1, Issue 1
September 2012, pp. 043-048.
6. A. Nahak and S. Dash, “A Study on Strength of Concrete with Partial Replacement of Cement with Saw
Dust Ash and Steel Fibre” International Journal of Engineering Research & Technology (IJERT) Vol. 4,
Issue 3, March 2015, pp. 134-137.
7. C. H. Srinivasa and Venkatesh, “Optimization of Granite Powder used as Partial Replacement to Cement in
the Design of Ready Mix Concrete of M20 Grade using IS10262:2009” International Journal of
Engineering Research & Technology (IJERT), Vol. 4, Issue 01, January 2015, pp. 104-111. C. O. Sorensen, E. A. Berge, P. E. Saga and A. Østvold, “Factors Affecting the Efficiency of Fibers in
Concrete on Crack Reduction” Open Journal of Civil Engineering, 2013, 3, pp. 80-85.
9. D. Maruthachalam and J. Muthukumar,"Mechanical Performance of Recycled PET Fiber Reinforced
Concrete with Low Volume Fraction," International Journal of Structural and Civil Engineering Research,
Vol. 2, No. 2, May 2013, pp. 101-108.
10. E. Rubaninbacheran and N. Ganesan, “Durability Studies on Fibre Concrete Using Partial Replacement of
Cement by Granite Powder” International Journal of Emerging Technology and Advanced Engineering
(IJETAE) Vol. 4, Issue 6, June 2014, pp. 443-452.
11. G. Elangovan, “Experimental Study of Concrete by Partial Replacement of Cement with Granite Dust
Powder” International Journal on Engineering Technology and Sciences (IJETS), Vol. 2, Issue 6, June
2015, pp. 025-028.
12. G. Murali, C. M. V. Vardhan, G. S. priya, P. Sruthee and P. Charmily, “Influence of Steel Fiber on
Concrete” International Journal of Engineering Research and Applications (IJERA) Vol. 2, Issue 3, MayJun 2012, pp. 075-078.
13. G. P. Arulraj, A. Adin and T. S. Kannan, “Granite Powder Concrete” IRACST – Engineering Science and
Technology: An International Journal (ESTIJ) Vol.3, Issue 1, February 2013, pp. 193-198.
14. H. Xu, Y. Zhao, L. Cui and B. Xu, “Sulphate attack resistance of high-performance concrete under
compressive loading” Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering),
2013-14, pp. 459-468.
15. K. Soman, D. Sasi and K. A. Abubaker, “Strength Properties of Concrete with Partial Replacement of
Cement by Granite Quarry Dust” International Journal of Engineering Research & Technology (IJERT)
Vol. 3, Issue 9, September 2014, pp. 344-348.
16. L. N. Vairagade and V. M. Bhedi, “Comparison of Strength between Steel Fiber Reinforced Concrete and
Conventional Concrete” International Journal on Recent and Innovation Trends in Computing and
Communication (IJRITCC) Vol. 3, Issue 2, February 2015, pp. 05-10.
17. M. E. Allam, E. S. Bakhoum and G. L. Garas, “Re-Use of Granite Sludge in Producing Green Concrete”
ARPN Journal of Engineering and Applied Sciences, Vol. 9, Issue 12, December 2014, pp. 2731-2737.
18. M. Karthick and K. Nirmalkumar, “Durability Properties of High Strength Self Compacting Concrete using
Silica Fume and Quarry Dust” International Journal of Scientific Engineering and Applied Science
(IJSEAS) Vol. 2, Issue 4, April 2016, pp 389-395.
19. M. N. Bajad, C. D. Modhera and A. K. Desai, “Factors Affecting the Properties of Conglasscrete” IOSR
Journal of Mechanical and Civil Engineering (IOSR-JMCE) Vol. 11, Issue 2 Ver. IV Mar- Apr. 2014, pp.
043-048.
20. M. V. Mohod, “Performance of Steel Fiber Reinforced Concrete” International Journal of Engineering and
Science (IJES) Vol. 1, Issue 12, December 2012, pp. 01-04.
21. M. Shanmugaraja, “Strength and Durabilitry of Fibre Reinforced Quarry Dust Concrete” International
Journal of Innovations in Engineering and Technology (IJIET) Vol. 6, Issue 2, December 2015, pp. 406-
408.
22. N. Shireesha, S. B. Murugan and G. N. Kumar, “Experimental Studies on Steel Fiber Reinforced Concrete”
International Journal of Science and Research (IJSR) Vol. 4, Issue 9, September 2015, pp. 598-602.
23. P. L. Chowdary, “Strength Properties of Effect of Waste Granite Powder on the Compressive Strength of
Concrete” An International Journal of Science, Computer Science and Engineering & Technology (JECET)
Vol. 4, Issue 24, June 2015, pp. 716-727.
24. P. Maca, J. Zatloukal and P. Konvalinka, "Development of Ultra High Performance Fiber Reinforced
Concrete mixture," 2012 IEEE Symposium on Business, Engineering and Industrial Applications,
Bandung, 2012, pp. 861-866.
25. R. Reju and G. J. Jacob, “Investigations on the chemical durability properties of Ultra High Performance
Fiber Reinforced Concrete” 2012 International Conference on Green Technologies (ICGT), Trivandrum,
2012, pp. 181-185.
high performance fiber reinforced concrete," 5th Brunei International Conference on Engineering and
Technology (BICET 2014), Bandar Seri Begawan, 2014, pp. 1-4.
2. A. E. Abalaka and A. D. Babalaga, “Effects of Sodium Chloride Solutions on Compressive Strength
Development of Concrete Containing Rice Husk Ash” ATBU Journal of Environmental Technology, Vol.
4, Issue 1, December 2011, pp. 033-040.
3. A. Ghaffar, A. S. Chavhan and R. S. Tatwawadi, “Steel Fibre Reinforced Concrete” International Journal
of Engineering Trends and Technology (IJETT) Vol. 9, Issue 15, Mar 2014, pp. 791-797.
4. A. H. Hosmani and S. B. Cholekar, “An Experimental Investigation on Concrete Produced by Replaing
Cement with Industrial Red Mud with Addition of Steel Fibers Subjected to Chloride Attack” The IUP
Journal of Structural Engineering, Vol. 9, Issue 3, September 2016, pp. 044-053.
5. A. M. Shende, A. M. Pande and M. G. Pathan, “Experimental Study on Steel Fiber Reinforced Concrete
for M-40 Grade” International Refereed Journal of Engineering and Science (IRJES) Vol. 1, Issue 1
September 2012, pp. 043-048.
6. A. Nahak and S. Dash, “A Study on Strength of Concrete with Partial Replacement of Cement with Saw
Dust Ash and Steel Fibre” International Journal of Engineering Research & Technology (IJERT) Vol. 4,
Issue 3, March 2015, pp. 134-137.
7. C. H. Srinivasa and Venkatesh, “Optimization of Granite Powder used as Partial Replacement to Cement in
the Design of Ready Mix Concrete of M20 Grade using IS10262:2009” International Journal of
Engineering Research & Technology (IJERT), Vol. 4, Issue 01, January 2015, pp. 104-111. C. O. Sorensen, E. A. Berge, P. E. Saga and A. Østvold, “Factors Affecting the Efficiency of Fibers in
Concrete on Crack Reduction” Open Journal of Civil Engineering, 2013, 3, pp. 80-85.
9. D. Maruthachalam and J. Muthukumar,"Mechanical Performance of Recycled PET Fiber Reinforced
Concrete with Low Volume Fraction," International Journal of Structural and Civil Engineering Research,
Vol. 2, No. 2, May 2013, pp. 101-108.
10. E. Rubaninbacheran and N. Ganesan, “Durability Studies on Fibre Concrete Using Partial Replacement of
Cement by Granite Powder” International Journal of Emerging Technology and Advanced Engineering
(IJETAE) Vol. 4, Issue 6, June 2014, pp. 443-452.
11. G. Elangovan, “Experimental Study of Concrete by Partial Replacement of Cement with Granite Dust
Powder” International Journal on Engineering Technology and Sciences (IJETS), Vol. 2, Issue 6, June
2015, pp. 025-028.
12. G. Murali, C. M. V. Vardhan, G. S. priya, P. Sruthee and P. Charmily, “Influence of Steel Fiber on
Concrete” International Journal of Engineering Research and Applications (IJERA) Vol. 2, Issue 3, MayJun 2012, pp. 075-078.
13. G. P. Arulraj, A. Adin and T. S. Kannan, “Granite Powder Concrete” IRACST – Engineering Science and
Technology: An International Journal (ESTIJ) Vol.3, Issue 1, February 2013, pp. 193-198.
14. H. Xu, Y. Zhao, L. Cui and B. Xu, “Sulphate attack resistance of high-performance concrete under
compressive loading” Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering),
2013-14, pp. 459-468.
15. K. Soman, D. Sasi and K. A. Abubaker, “Strength Properties of Concrete with Partial Replacement of
Cement by Granite Quarry Dust” International Journal of Engineering Research & Technology (IJERT)
Vol. 3, Issue 9, September 2014, pp. 344-348.
16. L. N. Vairagade and V. M. Bhedi, “Comparison of Strength between Steel Fiber Reinforced Concrete and
Conventional Concrete” International Journal on Recent and Innovation Trends in Computing and
Communication (IJRITCC) Vol. 3, Issue 2, February 2015, pp. 05-10.
17. M. E. Allam, E. S. Bakhoum and G. L. Garas, “Re-Use of Granite Sludge in Producing Green Concrete”
ARPN Journal of Engineering and Applied Sciences, Vol. 9, Issue 12, December 2014, pp. 2731-2737.
18. M. Karthick and K. Nirmalkumar, “Durability Properties of High Strength Self Compacting Concrete using
Silica Fume and Quarry Dust” International Journal of Scientific Engineering and Applied Science
(IJSEAS) Vol. 2, Issue 4, April 2016, pp 389-395.
19. M. N. Bajad, C. D. Modhera and A. K. Desai, “Factors Affecting the Properties of Conglasscrete” IOSR
Journal of Mechanical and Civil Engineering (IOSR-JMCE) Vol. 11, Issue 2 Ver. IV Mar- Apr. 2014, pp.
043-048.
20. M. V. Mohod, “Performance of Steel Fiber Reinforced Concrete” International Journal of Engineering and
Science (IJES) Vol. 1, Issue 12, December 2012, pp. 01-04.
21. M. Shanmugaraja, “Strength and Durabilitry of Fibre Reinforced Quarry Dust Concrete” International
Journal of Innovations in Engineering and Technology (IJIET) Vol. 6, Issue 2, December 2015, pp. 406-
408.
22. N. Shireesha, S. B. Murugan and G. N. Kumar, “Experimental Studies on Steel Fiber Reinforced Concrete”
International Journal of Science and Research (IJSR) Vol. 4, Issue 9, September 2015, pp. 598-602.
23. P. L. Chowdary, “Strength Properties of Effect of Waste Granite Powder on the Compressive Strength of
Concrete” An International Journal of Science, Computer Science and Engineering & Technology (JECET)
Vol. 4, Issue 24, June 2015, pp. 716-727.
24. P. Maca, J. Zatloukal and P. Konvalinka, "Development of Ultra High Performance Fiber Reinforced
Concrete mixture," 2012 IEEE Symposium on Business, Engineering and Industrial Applications,
Bandung, 2012, pp. 861-866.
25. R. Reju and G. J. Jacob, “Investigations on the chemical durability properties of Ultra High Performance
Fiber Reinforced Concrete” 2012 International Conference on Green Technologies (ICGT), Trivandrum,
2012, pp. 181-185.